
Same-day mold cleanup, testing, and removal across the northeast San Fernando Valley
Mold Remediation Near Me in PACOIMA, California
Mold Remediation Near Me in PACOIMA, California means a local crew that finds the moisture source, contains the growth, and removes it to the ANSI/IICRC S520 standard. We handle black mold behind drywall, crawl space mold under 1950s post-war homes, and attic mold after a roof leak. Call (833) 929-5837 and we roll a truck today.
What's included
What Mold Remediation Near Me Includes
Every remediation job we do in PACOIMA includes the core steps below. Add-ons like duct cleaning or reconstruction are quoted separately if you need them.
Moisture Inspection
A technician walks the property with a moisture meter, thermal imaging camera, and boroscope to find every wet area and hidden mold pocket. This takes 45 to 90 minutes and tells us exactly where the problem is.
Containment and HEPA Filtration
We seal the work zone with 6-mil containment plastic sheeting and duct tape, then run a negative air machine with HEPA filters. This keeps spores from spreading into clean rooms while we work.
Physical Removal
Contaminated drywall, insulation, carpet, and other porous materials come out in sealed bags. Structural wood gets HEPA vacuumed and treated with an antimicrobial spray. For heavy growth, we use dry ice blasting or RMR-86.
Drying and Dehumidification
We place Dri-Eaz or Phoenix Restoration dehumidifiers and air movers to pull moisture out of the structure. Drying typically runs 24 to 72 hours. We monitor with a moisture meter daily and adjust equipment as needed.
Clearance Testing
Post-remediation mold testing with a spore trap confirms the job worked. If the indoor count is at or below the outdoor baseline, it passes. You get a written clearance report and photo documentation for your records or insurance.
Service overview
What Mold Remediation Near Me in PACOIMA, California Covers
Mold Remediation Near Me in PACOIMA, California is the physical removal of fungal growth, contaminated building materials, and the moisture that feeds it. It is not a bleach wipe-down. A proper job means we map the moisture with a moisture meter and thermal imaging camera, build containment with 6-mil plastic sheeting and a negative air machine, then HEPA vacuum and scrub the affected surfaces. Porous materials like drywall and insulation come out. Structural wood gets treated with an antimicrobial spray and, when needed, an encapsulation coating.
Most calls we get in PACOIMA start with a musty odor, a dark stain on a ceiling, or a bathroom that never fully dries. The San Fernando Valley heat and the older housing stock here make it worse. A slow supply-line drip under a 1950s slab, a swamp cooler pan that overflowed in July, or a roof leak from last winter all feed mold within 24 to 48 hours. If you search for local mold removal PACOIMA, you want someone who knows these houses, not a franchise driving in from Santa Clarita.
The service timeline
Our 5-Step Mold Remediation Process
The process flexes to the condition, but these checkpoints keep decisions clear.
Inspection and Testing
A certified mold inspector walks the property with a moisture meter, thermal imaging camera, and boroscope. We take air samples with a spore trap and, when needed, surface swabs. You get lab results in 24 to 48 hours. This step takes 45 to 90 minutes depending on square footage.
Containment Setup
We seal the work zone with 6-mil containment plastic sheeting and duct tape, then install a negative air machine with HEPA filters. This keeps spores from drifting into clean rooms. Technicians suit up in disposable coveralls and respirator cartridges. Setup runs 30 to 60 minutes.
Removal and Cleaning
Contaminated drywall, insulation, and carpet come out in sealed bags. Structural wood gets HEPA vacuumed, then treated with an antimicrobial spray. For heavy growth on framing, we bring in a dry ice blasting machine or apply RMR-86 or Shockwave. This is the longest phase, often one to three days.
Drying and Treatment
We place Dri-Eaz or Phoenix Restoration dehumidifiers and air movers to pull remaining moisture out of the structure. A fogger applies Benefect or Concrobium to reach cavities a rag cannot. Drying typically runs 24 to 72 hours depending on how wet the materials are.
Clearance Testing
After drying, we run post-remediation mold testing with a spore trap. If the indoor count is at or below the outdoor baseline, the job passes. If not, we re-clean at no additional labor charge. You get a written clearance report and photo documentation.
Tools & methods
Tools and Methods We Use
Purpose-built equipment, used by trained technicians, so the job is done accurately the first time.
Moisture Meter
Reads moisture content in drywall, wood, and concrete. We use it to find hidden wet areas and to confirm materials are dry before we close a job.
Thermal Imaging Camera
Shows temperature differences behind walls, which reveals hidden moisture without cutting. This is how we find leaks that a visual inspection would miss.
Boroscope
A small camera on a flexible rod that lets us see inside wall cavities, ductwork, and crawl spaces. We use it to confirm mold growth before we open a wall.
Negative Air Machine
Creates negative pressure inside containment so airborne spores cannot escape into clean rooms. Runs continuously during removal.
HEPA Air Scrubber
Filters airborne spores and debris down to 0.3 microns. We run scrubbers during and after removal to clean the air in the work zone.
Dry Ice Blasting Machine
Uses compressed dry ice pellets to remove mold from wood framing without chemicals or abrasives. Ideal for attics and crawl spaces with heavy growth.
Fogger
Applies a fine mist of Benefect or Concrobium to reach cavities and surfaces a rag cannot. Used after physical removal to treat residual spores.
Use cases
When to Call for Mold Remediation Near Me
These examples show how the service framework adapts rather than forcing every call through one repair.

Crawl Space Mold After Wet Winter
A rental property in Arleta had a musty odor in the living room. The crawl space had mold on about 30% of the floor joists and wet insulation from a slow plumbing leak. Moisture readings were 22% to 26% on the joists. → We removed the wet insulation, HEPA vacuumed the joists, applied antimicrobial spray, and installed a vapor barrier. The leak was repaired by a plumber. Drying took 72 hours and the clearance test passed.
Attic Mold From Roof Leak
A home in Sun Valley had a roof leak that soaked the sheathing for months. Mold covered about 40 square feet of the attic deck. The homeowner noticed a stain on the ceiling and called us. → We contained the attic, removed the contaminated sheathing, and used dry ice blasting to clean the rafters. The roofer repaired the leak. Clearance testing passed after 48 hours of drying.
Problems we solve
Mold Problems We Solve in PACOIMA
These are the calls we get most often from PACOIMA homeowners and property managers.
Black mold behind bathroom drywall
We cut a small inspection hole, confirm the species with a surface sample, then remove the contaminated drywall inside containment. The framing gets HEPA vacuumed and treated with an antimicrobial spray. Clearance testing confirms the air is clean.
Crawl space mold after a wet winter
We remove contaminated insulation and debris, HEPA vacuum the joists, apply antimicrobial spray, and install a vapor barrier. This dries the space and keeps future moisture out. Most crawl space jobs take one to two days.
Attic mold from a roof leak
We test the sheathing, remove contaminated material, and treat the framing with dry ice blasting or antimicrobial spray. If the leak is still active, we identify it and recommend a roofer before we close the job.
HVAC mold contamination
We inspect the air handler and ducts with a boroscope, then clean and treat contaminated components. In severe cases we recommend duct replacement. We also run air scrubbers during the job to keep spores out of living spaces.
Pricing process
What Mold Remediation Costs in PACOIMA
$180 - $12,000 depending on scope
Square footage affected
A 10-square-foot bathroom patch is a different job than a 200-square-foot crawl space. More area means more containment, more removal, and more disposal. This is the single biggest driver of cost.
Depth of contamination
Surface mold on tile or painted wood can be cleaned. Mold that has grown into drywall, insulation, or subfloor means those materials come out and get replaced. Deep contamination costs more but is the only way to fix it.
Testing and clearance
Air sampling with a spore trap and lab analysis adds $150 to $400 depending on how many samples we take. Clearance testing at the end is included in most jobs. Testing is what proves the job worked.
Where can I find mold remediation near me in PACOIMA?
You just did. We are a PACOIMA-based mold remediation company serving the northeast San Fernando Valley, and we dispatch from local trucks, not a call center. Call (833) 929-5837 and we can usually schedule an inspection the same day. We cover Pacoima, Hansen Hills, Arleta, Lake View Terrace, Sun Valley, and Shadow Hills.
How much does local mold removal cost in PACOIMA California?
Typical 2026 pricing in this area runs $180 to $450 for a small bathroom or closet job, $1,200 to $3,500 for a crawl space or attic, and $4,000 to $12,000 for whole-room or post-flood remediation. Cost depends on square footage, how deep the mold has grown into materials, and whether testing is included. We give you a written range before we start.
Who offers emergency mold remediation near me in PACOIMA?
We do, 24 hours a day. If you have a burst pipe, a flooded bathroom, or a roof leak feeding mold right now, call (833) 929-5837 and we will roll a truck. Emergency response means containment and drying start the same day, which stops the mold from spreading into adjacent rooms and saves you thousands in the long run.
Can I get same day mold cleanup near me in PACOIMA California?
Yes, in most cases. Call before 2 p.m. and we can typically have a technician on site the same day for inspection and initial containment. Full removal may run one to three days depending on scope, but we start the work the day you call. Same-day mold testing is also available so you get lab answers within 24 to 48 hours.
Ready when you are
Get Mold Remediation Near Me in PACOIMA, California Today
Mold gets worse every day you wait. Call (833) 929-5837 and we will schedule an inspection, give you a written range, and start containment the same day when needed. Licensed, insured, and local to the northeast Valley.

Talk with the local team
Request Mold Remediation Near Me
Call us at (833) 929-5837 or email info@moldremediationservicepacoima.com. We answer the phone 24/7 for emergencies and we schedule same-day estimates for non-emergency work. If you are not sure whether you need testing or full remediation, call us and we will walk you through it. No pressure, no sales pitch.



