
Licensed, insured, and ready for 24/7 emergency mold cleanup
Mold Remediation Company in PACOIMA, California
Mold Remediation Company in PACOIMA, California is who you call when you see black mold growth, smell that musty odor, or find water damage mold spreading behind drywall. We handle residential and commercial mold removal, from crawl space mold to attic mold, with IICRC-certified technicians and same-day estimates. If you need a mold removal contractor PACOIMA homeowners trust, call (833) 929-5837.
What's included
What Our Mold Remediation Company Includes
Every mold remediation job includes a full inspection, containment, removal, treatment, and clearance testing. We also provide documentation for insurance and a written warranty. Add-ons like dry ice blasting or odor removal are available if needed.
Full Mold Inspection
We inspect your entire property, including attics, crawl spaces, basements, and HVAC systems. We use moisture meters, thermal imaging cameras, and boroscopes to find hidden mold. You get a detailed report with photos and moisture readings.
Containment and Air Filtration
We seal off the affected area with containment plastic sheeting and set up negative air machines and air scrubbers with HEPA filters. This keeps mold spores from spreading to other parts of your home during removal.
Mold Removal and Disposal
We remove moldy drywall, insulation, wood, and other materials. All debris is bagged and disposed of according to California regulations. We HEPA vacuum all surfaces to remove remaining spores.
Antimicrobial Treatment
After removal, we apply antimicrobial spray and mold remediation chemicals like Shockwave or RMR-86 to kill any remaining mold. We also use foggers with Benefect or Concrobium to treat hard-to-reach areas.
Post-Remediation Testing
We schedule a third-party clearance test 24 to 48 hours after remediation. If spore levels are normal, we provide a clearance certificate. If not, we re-clean at no extra cost. You get documentation for your records.
Service overview
What a Mold Remediation Company in PACOIMA, California Does
A Mold Remediation Company in PACOIMA, California is a licensed and insured contractor that locates mold growth, contains it, removes contaminated materials, and restores your property to a safe condition. We start with a moisture meter and thermal imaging camera to find the water source, then use air scrubbers, HEPA vacuums, and negative air machines to stop spores from spreading. Every job follows ANSI/IICRC S520, the industry standard for mold remediation, and we finish with post-remediation mold testing to prove the air is clean.
PACOIMA homes deal with mold year-round because of our hot, dry summers followed by winter rains that find every roof leak and cracked foundation. Older houses near Van Nuys Boulevard often have original plumbing that seeps behind walls, and the Pacoima Wash area sees humidity spikes after storms. If you search for a mold remediation company in PACOIMA California near me, you need a team that knows these local conditions and can get to you fast. We handle everything from bathroom mold removal service to toxic mold removal.
The service timeline
Our Mold Remediation Process
The process flexes to the condition, but these checkpoints keep decisions clear.
Inspection and Testing
We arrive within 60 to 90 minutes for emergencies and start with a full visual inspection using moisture meters, thermal imaging cameras, and boroscopes. We collect air samples with spore traps and surface samples to identify the mold type and spore count. This usually takes 45 to 90 minutes depending on the size of your home.
Containment and Setup
We seal off the affected area with containment plastic sheeting and duct tape, then set up negative air machines and air scrubbers with HEPA filters. This stops mold spores from spreading to clean rooms during removal. Setup takes 30 to 60 minutes for most residential jobs.
Removal and Cleaning
Our technicians remove moldy drywall, insulation, and wood, then HEPA vacuum all surfaces. We apply antimicrobial spray and use dry ice blasting machines for tough spots on framing. For porous materials, removal is the only safe option. This phase takes one to three days depending on the scope.
Treatment and Encapsulation
After removal, we treat the area with mold remediation chemicals like Shockwave or RMR-86, then apply an encapsulation coating to prevent future growth. We also run dehumidifiers and foggers with Benefect to eliminate musty odors. This step takes four to eight hours.
Post-Remediation Testing
We schedule a third-party clearance test 24 to 48 hours after remediation. If spore counts are normal, we provide a clearance certificate. If not, we re-clean at no extra charge. You get documentation for your insurance claim and your records.
Tools & methods
Tools and Methods We Use for Mold Remediation
Purpose-built equipment, used by trained technicians, so the job is done accurately the first time.
Moisture Meter
Detects moisture levels in walls, floors, and ceilings to find hidden water sources that feed mold growth.
Thermal Imaging Camera
Reveals temperature differences behind walls to locate hidden mold and water damage without tearing into surfaces.
Air Scrubber
Filters airborne mold spores and particles using HEPA filters, improving air quality during and after remediation.
HEPA Vacuum
Removes mold spores from surfaces and materials with high-efficiency filtration, preventing spores from becoming airborne.
Negative Air Machine
Creates negative pressure in the containment area to stop mold spores from escaping into clean rooms.
Dry Ice Blasting Machine
Uses dry ice pellets to blast mold off wood framing and hard-to-reach areas without water or chemicals.
Fogger
Applies a fine mist of antimicrobial chemicals like Benefect or Concrobium to treat large areas and hidden mold.
Use cases
When to Call Our Mold Remediation Company
These examples show how the service framework adapts rather than forcing every call through one repair.

Crawl Space Mold Remediation in Arleta
A property manager in Arleta discovered mold on the floor joists in a rental unit's crawl space. The mold covered about 200 square feet and was caused by poor ventilation and high humidity. Tenants had complained of musty odors. → We removed mold from the joists using dry ice blasting, then treated with Benefect. We installed a vapor barrier and improved ventilation. Clearance testing confirmed the mold was gone. The musty odor disappeared.
Attic Mold Removal in Terra Bella
After winter rains, a homeowner in Terra Bella found mold in their attic from a roof leak. The mold covered about 100 square feet of insulation and wood framing. The homeowner was concerned about air quality and structural damage. → We removed moldy insulation and wood, treated with RMR-86, and used HEPA vacuums to clean surfaces. We repaired the roof leak and improved attic ventilation. Post-remediation testing showed normal spore levels.
Problems we solve
Mold Problems We Solve for PACOIMA Properties
From black mold growth to musty odors, we handle the mold issues that PACOIMA homeowners and business owners face every day. Here are the most common problems we solve.
Black mold growth on walls and ceilings
We contain the area, remove moldy materials, and treat with antimicrobial spray. We use HEPA vacuums and air scrubbers to remove spores, then apply an encapsulation coating to prevent regrowth.
Musty odors from hidden mold
We use thermal imaging and boroscopes to find hidden mold, then remove it and treat the area with foggers and air scrubbers. We also identify and fix the moisture source to stop the smell from returning.
Crawl space mold from high humidity
We remove mold from joists and subfloor, treat with antimicrobial spray, and install a vapor barrier if needed. We also improve ventilation to keep humidity low and prevent future growth.
Attic mold from roof leaks
We inspect the attic, remove moldy insulation and wood, and treat with mold remediation chemicals. We also fix the roof leak and improve ventilation to prevent mold from coming back.
Pricing process
Mold Remediation Pricing in PACOIMA
$500 - $10,000+ depending on scope
Size of Mold Growth
The larger the affected area, the more materials and labor are needed. Mold covering less than 10 square feet costs less than mold covering an entire wall or room.
Type of Materials Affected
Porous materials like drywall and insulation must be removed and replaced, which increases cost. Non-porous materials like tile or metal can often be cleaned and treated.
Location of Mold
Mold in hard-to-reach areas like crawl spaces or attics requires more labor and special equipment, increasing the cost. Mold in living areas is easier to access.
How much does a mold remediation company cost in PACOIMA California?
Most mold remediation jobs in PACOIMA cost between $1,200 and $6,500, with the average around $2,800. Small areas under 10 square feet may run $500 to $1,200, while whole-home remediation can exceed $10,000. Factors include the size of the mold growth, the type of materials affected, and whether you need emergency service. We provide free estimates so you know the exact cost before we start.
How do I choose a mold removal contractor in PACOIMA?
Look for IICRC certification, liability insurance, and a written scope of work before you hire. Ask if they perform post-remediation testing and whether they follow ANSI/IICRC S520 standards. A reputable mold removal contractor PACOIMA California will provide references and show you photos of the mold they find. Avoid anyone who quotes a price without inspecting the property first.
Who is the best mold remediation company near me in PACOIMA?
The best mold remediation company near you is one that is licensed, insured, and certified, with a track record of successful jobs in PACOIMA. We hold IICRC and ACAC certifications, carry full insurance, and have completed hundreds of remediations in the San Fernando Valley. We offer free estimates, 24/7 emergency service, and a written warranty on every job.
Are mold remediation companies licensed in PACOIMA California?
Yes, mold remediation companies in California must hold a valid contractor license from the California Contractors State License Board (CSLB). We are fully licensed and insured. You can verify any contractor's license on the CSLB website. We also carry workers comp and liability insurance, and our technicians are trained to OSHA HAZWOPER and Cal/OSHA standards.
Ready when you are
Call Your Mold Remediation Company in PACOIMA, California
Mold does not wait, and neither should you. We are licensed, insured, and ready to respond 24/7. Call (833) 929-5837 now for a free estimate and same-day service.

Talk with the local team
Request Mold Remediation Company
Call us at (833) 929-5837 or email info@moldremediationservicepacoima.com. We answer the phone 24/7 for emergencies and we schedule same-day estimates for non-emergency work. If you are not sure whether you need testing or full remediation, call us and we will walk you through it. No pressure, no sales pitch.



