Crawl Space Mold Removal

We kill the mold, dry the wood, and seal the space.

Crawl Space Mold Removal in PACOIMA, California Done Right

Crawl Space Mold Removal in PACOIMA, California is what we do when a musty smell won't leave your house and the floor feels soft underfoot. We pull the vapor barrier, HEPA-vac the joists, treat the wood, and set up encapsulation so the mold doesn't come back next rainy season. If you've been searching for crawl space mold removal PACOIMA homeowners can actually reach, we answer the phone 24/7.

Live phone supportUpfront optionsBacked workmanship
Call firstLive triage can help before arrival
Safety before speedRisks assessed before work begins
Diagnose the causeWe trace the source, not just the symptom
Approve the workScope and price explained upfront

What's included

What's Included in Crawl Space Mold Removal

Every crawl space job is different, but these are the core steps we include on a standard treatment. If your job needs more, like subfloor replacement or a full encapsulation system, we'll tell you before we start and quote it separately.

01

Full Crawl Space Inspection

We crawl the entire space with a moisture meter, thermal imaging camera, and boroscope. We check every joist, pier, and insulation batt. You get photos and moisture readings for anything we find.

02

Air and Surface Sampling

We take spore trap samples before treatment and send them to a lab. The report tells you the spore type and count. That baseline matters for the clearance test at the end.

03

Containment and Negative Air

We hang containment plastic sheeting and run a negative air machine with HEPA filters. This keeps spores from drifting into your living space while we work. We also seal the access hatch.

04

Mold Removal and Treatment

We HEPA-vac every surface, then treat with Fiberlock Shockwave or RMR-86. Heavy growth gets dry ice blasting. We finish with a Concrobium fog to reach the crevices.

05

Vapor Barrier Replacement

A torn or missing vapor barrier is usually the root cause. We install a new 6-mil or 10-mil barrier, seal the seams, and run it up the piers. That's what keeps moisture out long-term.

06

Clearance Testing

We run a post-remediation spore trap test and compare it to an outdoor control sample. You get the lab report by email. If it doesn't pass, we re-treat at no extra charge.

Service overview

Crawl Space Mold Removal in PACOIMA, California

Crawl Space Mold Removal in PACOIMA, California is the process of containing, killing, and removing mold growth from the joists, subfloor, insulation, and piers under your house, then correcting the moisture that caused it. We set up containment plastic sheeting, run a negative air machine with HEPA filters, and treat every affected surface with an antimicrobial spray. When the wood is too far gone, we remove it and rebuild. The job ends with a dry crawl space and a post-remediation spore trap test to prove the air is clean.

Most PACOIMA homes sit on raised foundations with a dirt floor and a thin plastic vapor barrier that tears after a few summers. Add a slow supply-line drip or a washing machine hose that let go, and you've got black mold growth on the subfloor within 48 to 72 hours. Homeowners call us after they notice a musty odor in the hallway or a soft spot near the bathroom. If you need under house mold remediation PACOIMA California residents can schedule same week, we handle the whole job from inspection to clearance testing.

Stops Musty Odors FastThat smell in your hallway is mold spores off-gassing from wet wood. We run air scrubbers and a fogger with Benefect to knock down airborne spores, then treat the source. Most customers notice the difference within 24 hours of the job finishing. No more masking it with candles.
Protects Your SubfloorSubfloor mold removal PACOIMA wide means catching rot before the plywood delaminates. We probe every joist with a moisture meter and a boroscope. If the wood reads above 20% moisture content, we dry it with Dri-Eaz and Phoenix Restoration equipment before we treat. Catching it early saves you a floor replacement.
Passes Clearance TestingWe follow ANSI/IICRC S520 and run a post-remediation spore trap test after every job. You get a lab report showing spore counts inside the containment are at or below outdoor levels. That report matters if you're selling the house or filing an insurance claim.
Local Mold Remediation Service team in PACOIMA
How we workWe verify the cause, compare realistic options, and confirm the repair before we leave.

The service timeline

What to Expect During the Job

The process flexes to the condition, but these checkpoints keep decisions clear.

01

Inspection & Testing

We suit up in disposable coveralls and a respirator, then crawl the space with a moisture meter, thermal imaging camera, and boroscope. We take air samples with a spore trap and send them to a lab. You get the report within 24 hours. This step takes 60 to 90 minutes on a typical 1,200 sq ft crawl space.

Stage 1
02

Containment Setup

We hang containment plastic sheeting around the affected area and seal it with duct tape. A negative air machine with HEPA filters pulls air out so spores don't drift into your living space. We also tape off the access hatch. Setup takes 30 to 45 minutes.

Stage 2
03

Mold Removal & Treatment

We HEPA-vac every surface, then treat the wood with Fiberlock Shockwave or RMR-86. Heavy growth on joists gets dry ice blasting with dry ice pellets, which lifts mold off without soaking the wood. We fog the whole space with Concrobium to reach the crevices a sprayer misses. This is the longest step, usually 3 to 6 hours.

Stage 3
04

Repairs & Encapsulation

Rotted subfloor sections come out and get replaced. We lay a new vapor barrier, seal the seams, and apply an encapsulation coating to the joists and piers. If the space needs it, we install a dehumidifier on a drain line. This step runs 2 to 4 hours depending on square footage.

Stage 4
05

Clearance Testing

We run a second spore trap test inside the containment and compare it to an outdoor control sample. If the numbers pass, we tear down the containment and haul everything out. You get the lab report by email. If it doesn't pass, we re-treat at no extra charge.

Stage 5

Tools & methods

Tools and Methods We Use

Purpose-built equipment, used by trained technicians, so the job is done accurately the first time.

01

Moisture Meter

Reads moisture content in wood and drywall. Anything above 20% is a mold risk. We use it to map the affected area before we treat.

02

Thermal Imaging Camera

Shows temperature differences that reveal hidden moisture behind walls and under floors. It helps us find leaks we can't see with the naked eye.

03

Boroscope

A camera on a flexible rod that lets us inspect inside joist bays and wall cavities without cutting them open. We use it to check for hidden growth.

04

HEPA Vacuum

Captures mold spores and debris at 99.97% efficiency. We vacuum every surface in the containment before we apply any treatment.

05

Negative Air Machine

Pulls air out of the containment through HEPA filters so spores don't drift into your living space. We run one on every job.

06

Air Scrubber

Circulates and filters air inside the containment. We run air scrubbers alongside the negative air machine to keep the workspace clean.

07

Fogger

Disperses Concrobium or Benefect as a fine mist that reaches crevices a sprayer can't. We fog the whole crawl space after treatment.

08

Dry Ice Blasting Machine

Uses dry ice pellets to lift mold off wood without adding moisture. It's the best option for heavy growth on joists.

Use cases

When to Call for Crawl Space Mold Removal

These examples show how the service framework adapts rather than forcing every call through one repair.

Crawl Space Mold Removal
Musty Odor Gone in PacoimaA homeowner on the north side of Pacoima had been smelling something musty in the hallway for months. The crawl space had visible black mold growth on about 200 sq ft of joists and subfloor, caused by a slow leak under the bathroom. Moisture readings were above 25% in several spots. → We contained the area, HEPA-vacuumed every surface, and treated the wood with Fiberlock Shockwave. We replaced two rotted joist sections and installed a new 6-mil vapor barrier. The clearance test came back clean, and the homeowner said the smell was gone within a day.

Storm Water Cleanup in Arleta

A winter storm pushed water under a house in Arleta and floated the vapor barrier. The homeowner didn't notice for a week. By then, mold had started growing on the lower joists and the insulation was soaked. The crawl space smelled like a wet basement. → We pumped out standing water, dried the space with Dri-Eaz and Phoenix Restoration equipment, and treated the mold with RMR-86. We replaced the soaked insulation and installed a new 10-mil vapor barrier. The clearance test passed on the first try.

Pre-Sale Clearance in Sun Valley

A duplex in Sun Valley was under contract when the buyer's inspector flagged mold in both crawl spaces. The seller needed a clean clearance report fast to keep the sale moving. The mold was moderate, about 150 sq ft per unit, with moisture readings around 22%. → We inspected and tested both units, contained the affected areas, and treated the growth with Concrobium fog and antimicrobial spray. We installed new vapor barriers in both crawl spaces. The post-remediation spore trap tests passed, and we delivered the lab reports within 48 hours.

Problems we solve

Crawl Space Problems We Fix in PACOIMA

Most crawl space calls start with one of these four problems. If any of them sound familiar, it's worth getting the space inspected before the damage gets worse.

ISSUE

Musty odor that won't go away

We find the moisture source, contain the affected area, and treat the growth with antimicrobial spray and a Concrobium fog. Most customers notice the smell is gone within 24 hours of the job finishing.

SYMPTOM

Soft or sagging floors

We probe every joist with a moisture meter and boroscope. Rotted sections come out and get replaced with new lumber. We dry the surrounding wood with Dri-Eaz and Phoenix Restoration equipment before we treat.

SIGN

High humidity under the house

We install a new 6-mil or 10-mil vapor barrier, seal the seams, and run it up the piers. If the space stays damp, we set up a dehumidifier on a drain line. That's the permanent fix.

ALERT

Mold spreading into the HVAC

We contain the crawl space before we start, run negative air with HEPA filters, and check the HVAC returns for growth. If mold made it into the system, we treat that too so it doesn't keep circulating.

Pricing process

What Crawl Space Mold Removal Costs

$1,800 - $6,500 depending on scope

Phase 01

Square footage affected

The bigger the affected area, the more containment, treatment, and disposal work. A 200 sq ft job takes a few hours. A 1,200 sq ft crawl space can take two days.

Phase 02

Severity of the growth

Light surface mold on joists cleans up fast. Heavy growth that's penetrated the wood needs dry ice blasting or removal and replacement. That adds labor and disposal cost.

Phase 03

Rotted wood repairs

If the subfloor or joists have lost structural strength, we replace them. Lumber, labor, and disposal add to the bill. Catching mold early usually avoids this cost.

Questions before we arrive

Frequently Asked Questions

Crawl Space Mold Removal
Call (833) 929-5837
How much does crawl space mold removal cost in PACOIMA California?

Most crawl space jobs in PACOIMA run $1,800 to $6,500 in 2026, depending on square footage, how far the mold spread, and whether we're replacing rotted wood. A small treatment with a new vapor barrier sits at the low end. Full encapsulation with subfloor repairs and a dehumidifier sits at the high end. We quote the job before we start, so you know the number up front.

What causes crawl space mold in PACOIMA?

Three things cause most of it: a torn or missing vapor barrier, poor drainage that lets groundwater pool under the house, and plumbing leaks that drip for weeks before anyone notices. PACOIMA's summer heat pulls moisture up through the soil, and the crawl space stays humid. Add a slow leak and you'll have visible growth on the joists in 48 to 72 hours. Fixing the moisture is the only permanent cure.

Who does under house mold remediation near me in PACOIMA?

We do. Our crews work raised-foundation homes across PACOIMA, Hansen Hills, Arleta, and Sun Valley. We handle the whole job: inspection, containment, removal, wood treatment, vapor barrier, and clearance testing. If you've been searching for under house mold remediation PACOIMA California homeowners can reach on short notice, call (833) 929-5837 and we'll schedule a same-day or next-day inspection.

Can crawl space mold removal be done same day in PACOIMA California?

Yes, for smaller jobs. If the affected area is under about 300 sq ft and there's no rotted wood to replace, we can inspect in the morning and treat the same afternoon. Larger jobs with subfloor repairs or full encapsulation need a second day. Call before noon and we'll tell you on the phone whether your job fits same-day.

Ready when you are

Get Crawl Space Mold Removal in PACOIMA, California

If you smell something musty or your floor feels soft, don't wait. Mold spreads fast in a damp crawl space, and the longer it sits, the more wood it eats. Call (833) 929-5837 and we'll schedule an inspection, give you a straight quote, and get the job done right. We're licensed, insured, and we answer the phone 24/7.

Crawl Space Mold Removal

Talk with the local team

Request Crawl Space Mold Removal

Call us at (833) 929-5837 or email info@moldremediationservicepacoima.com. We answer the phone 24/7 for emergencies and we schedule same-day estimates for non-emergency work. If you are not sure whether you need testing or full remediation, call us and we will walk you through it. No pressure, no sales pitch.

13520 Paxton St, Pacoima, CA 91331, USA, PACOIMA, CaliforniaMain office · technicians serve the full area

Thanks — your request is in. We will contact you shortly.

Call now