
Certified inspectors, thermal imaging, and lab-backed spore trap results
Commercial Mold Inspection in PACOIMA, California That Finds Hidden Growth
Commercial Mold Inspection in PACOIMA, California is how property owners find mold before it shuts down a building. We inspect offices, warehouses, retail spaces, and multi-unit properties across the northeast San Fernando Valley. Using moisture meters, thermal imaging cameras, and spore traps, we locate hidden growth behind drywall, above ceiling tiles, and inside HVAC systems. You get a written report with lab results and a clear scope of work. Call (833) 929-5837.
What's included
What Our Commercial Mold Inspection Includes
Every commercial mold inspection includes a full building assessment, moisture mapping, air and surface sampling, and a written report with lab results. We also offer optional add-ons like post-remediation testing and HVAC inspection. Here is what you get.
Full Building Walkthrough
We inspect every room, hallway, mechanical space, and storage area. We check for visible mold, water stains, musty odors, and signs of moisture. We also look at the building exterior for leaks or drainage issues.
Moisture Mapping with Thermal Imaging
We use moisture meters and a thermal imaging camera to find hidden moisture behind walls, under floors, and above ceilings. We mark every wet area on a floor plan so you see exactly where the problems are.
Air and Surface Sampling
We collect air samples with spore traps and surface samples from visible growth. Samples go to an accredited lab. The lab identifies mold species and spore counts. Results come back in 24 to 48 hours.
Written Report with Lab Results
You get a written report with photos, moisture readings, lab results, and a recommended scope of work. We walk you through the findings by phone or in person. The report is designed for property managers, owners, and lenders.
HVAC System Inspection
We inspect your HVAC system for mold contamination. Mold in HVAC ducts spreads spores through the entire building. We check air handlers, ductwork, and coils. If we find mold, we recommend remediation.
Post-Remediation Verification
If you hire us for remediation, we include post-remediation testing to confirm the mold is gone. We take air samples and provide a clearance report. This is important for insurance claims and tenant peace of mind.
Service overview
What Commercial Mold Inspection in PACOIMA, California Covers
Commercial Mold Inspection in PACOIMA, California is a non-invasive building assessment that locates active mold growth, hidden moisture, and airborne spores before they spread. Our certified inspectors start with a full walkthrough of the property, then use moisture meters and thermal imaging cameras to map wet areas behind walls, under floors, and above ceilings. We collect air samples with spore traps and surface samples from visible growth, then send everything to an accredited lab. You get a written report with lab results, photos, and a scope of work within 24 to 48 hours.
PACOIMA commercial buildings face specific moisture problems. Summer temperatures push past 100 degrees, so HVAC systems run hard and condensate lines drip into ceiling cavities. Winter rains soak flat roofs and stucco walls on older Van Nuys Boulevard storefronts. When a business mold assessment PACOIMA property owners trust is done right, it catches these problems before they turn into a shutdown. If you have been searching for commercial mold inspection in PACOIMA California near me, we cover the entire 91331 area and surrounding neighborhoods.
The service timeline
How Our Commercial Mold Inspection Process Works
The process flexes to the condition, but these checkpoints keep decisions clear.
Phone Intake
Call (833) 929-5837 and tell us what you are seeing. Musty odors, water stains, visible growth, or a recent leak. We ask about the building size, the type of HVAC system, and any recent water damage. This takes 10 to 15 minutes and lets us bring the right equipment.
On-Site Walkthrough
A certified inspector arrives at your PACOIMA property, usually within 24 hours. We walk the entire building, paying close attention to bathrooms, break rooms, mechanical rooms, and anywhere water runs. We check crawl spaces, attics, and ceiling plenums. This walkthrough takes 45 to 90 minutes depending on square footage.
Moisture Mapping
We use moisture meters and a thermal imaging camera to find hidden moisture behind walls and under floors. A boroscope lets us look inside wall cavities without cutting large holes. We mark every wet area on a floor plan so you see exactly where the problems are.
Air and Surface Sampling
We set spore traps to capture airborne mold spores and take surface samples from visible growth. Samples go to an accredited lab. Results come back in 24 to 48 hours. The lab tells us the type of mold and the spore count, which tells us how serious the problem is.
Written Report and Scope
You receive a written report with lab results, photos, moisture readings, and a recommended scope of work. We walk you through the findings by phone or in person. If remediation is needed, we can schedule it immediately. If not, you have documentation that the building is clean.
Tools & methods
Tools and Methods We Use for Commercial Mold Inspection
Purpose-built equipment, used by trained technicians, so the job is done accurately the first time.
Thermal Imaging Camera
We use a thermal imaging camera to find temperature differences that indicate hidden moisture behind walls, under floors, and above ceilings. This lets us find mold without tearing into walls.
Moisture Meter
A moisture meter measures the water content in building materials. We use it to confirm wet areas and track moisture levels. This helps us determine if a material needs to be removed or can be dried.
Boroscope
A boroscope is a small camera on a flexible tube. We insert it into wall cavities and crawl spaces to look for mold growth without making large holes. It lets us see inside walls.
Spore Trap
A spore trap collects airborne mold spores on a slide. We send the slide to a lab for analysis. The lab counts the spores and identifies the species. This tells us if the air is contaminated.
Air Scrubber
An air scrubber uses HEPA filters to remove mold spores from the air. We use air scrubbers during remediation to keep the air clean and prevent cross-contamination.
HEPA Vacuum
A HEPA vacuum is used to clean up mold spores from surfaces. It traps particles as small as 0.3 microns. We use it after remediation to remove all remaining spores.
Negative Air Machine
A negative air machine creates negative pressure in a containment area. This prevents mold spores from spreading to other parts of the building during remediation.
Use cases
When to Schedule Commercial Mold Inspection
These examples show how the service framework adapts rather than forcing every call through one repair.

Warehouse Attic Mold After Roof Leak
A 10,000 square foot warehouse in Pacoima had a roof leak during winter rains. The owner noticed water stains on the ceiling but did not see mold. We inspected the attic and found extensive mold growth on the roof deck and insulation. → We set up containment with plastic sheeting and negative air machines. We removed the moldy insulation, treated the roof deck with antimicrobial spray, and used HEPA vacuums to clean the air. Lab results confirmed the mold was gone.
Restaurant Bathroom Mold
A restaurant in Glenoaks had black mold growth on the bathroom ceiling and walls. The health inspector flagged it during a routine visit. The owner needed a fast inspection and remediation to pass re-inspection. → We inspected the bathroom and found mold due to poor ventilation. We removed the moldy drywall, treated the area with antimicrobial spray, and installed a new exhaust fan. Post-remediation testing confirmed the mold was gone. The restaurant passed re-inspection.
Problems we solve
Problems We Solve with Commercial Mold Inspection in PACOIMA
Mold in a commercial building causes health problems, tenant complaints, and expensive repairs. These are the most common problems we solve for PACOIMA businesses.
Musty odors that will not go away
We use thermal imaging and boroscopes to find the source of the odor. We test the air and surfaces to confirm mold growth. Then we give you a scope of work to remove it and fix the moisture problem.
Water stains on ceilings or walls
We trace the moisture back to its source using moisture meters and thermal cameras. We test for mold and give you a report. If mold is present, we remove it and fix the leak.
Employees or tenants complaining of allergies
We test the air quality in your building with spore traps. The lab identifies mold species and spore counts. You get documentation to show the building is safe or to justify remediation.
Recent flood or leak in the building
We inspect the entire building for moisture and mold. We use dehumidifiers and air scrubbers if needed. We test for mold and provide a report for your insurance claim.
Pricing process
Commercial Mold Inspection Pricing in PACOIMA
$350 - $900 depending on building size and number of samples
Building Square Footage
Larger buildings take longer to inspect and require more samples. A 2,000 square foot office might take two hours and cost $350. A 10,000 square foot warehouse might take four hours and cost $900.
Number of Air Samples
Each air sample costs $50 to $75. We recommend at least three samples: one outdoor control and two indoor. More samples give a more accurate picture but increase cost.
Crawl Space or Attic Access
If your building has a crawl space or attic, we need to inspect it. These areas often have hidden mold. Access can be difficult, which adds time and cost.
Questions before we arrive
Frequently Asked Questions About Commercial Mold Inspection

How much does commercial mold inspection cost in PACOIMA California?
Most commercial mold inspections in PACOIMA run $350 to $900. The price depends on square footage, how many air samples we take, and whether we need to inspect crawl spaces or attics. A small office under 2,000 square feet with three samples usually lands around $350 to $450. A warehouse over 10,000 square feet with multiple HVAC units and 10 samples can reach $900. We give you a written quote before we start.
What does a business mold assessment include in PACOIMA?
A business mold assessment PACOIMA includes a full building walkthrough, moisture mapping with thermal imaging, air sampling with spore traps, surface sampling of visible growth, and a written report with lab results. We check HVAC systems, crawl spaces, attics, bathrooms, and any area with water history. You get photos, moisture readings, and a scope of work. The whole process takes two to four hours on site, and lab results come back in 24 to 48 hours.
How often should commercial properties get mold inspection in PACOIMA?
We recommend a commercial mold inspection in PACOIMA California every 12 months for most buildings. Properties with flat roofs, older HVAC systems, or a history of water damage should be inspected every six months. If you have had a leak, flood, or tenant complaint about musty odors, schedule an inspection immediately. Regular inspections catch small problems before they become expensive remediation projects.
Who offers commercial mold testing near me in PACOIMA California?
Mold Remediation Service Pacoima offers commercial mold testing PACOIMA and inspection services across the 91331 area. We are certified through IICRC and ACAC, and we follow ANSI/IICRC S520 standards. We serve offices, warehouses, retail spaces, restaurants, and multi-unit properties. Call (833) 929-5837 to schedule same-day or 24/7 emergency service.
Ready when you are
Schedule Your Commercial Mold Inspection in PACOIMA, California
We answer the phone 24/7 and can have an inspector at your property same-day. You get a written report with lab results in 24 to 48 hours. Call now and protect your building, your employees, and your business.

Talk with the local team
Request Commercial Mold Inspection
Call us at (833) 929-5837 or email info@moldremediationservicepacoima.com. We answer the phone 24/7 for emergencies and we schedule same-day estimates for non-emergency work. If you are not sure whether you need testing or full remediation, call us and we will walk you through it. No pressure, no sales pitch.


