Basement Mold Inspection

Certified inspectors find hidden basement mold before it spreads

Basement Mold Inspection in PACOIMA, California You Can Trust

Basement Mold Inspection in PACOIMA, California is the fastest way to find out whether the musty smell in your below-grade space is active mold or just old concrete. We inspect basements, cellars, and crawl spaces across Pacoima with moisture meters, thermal imaging cameras, and lab-backed spore traps. If mold is growing, you will know exactly where, how bad, and what it takes to remove it.

Live phone supportUpfront optionsBacked workmanship
Call firstLive triage can help before arrival
Safety before speedRisks assessed before work begins
Diagnose the causeWe trace the source, not just the symptom
Approve the workScope and price explained upfront

What's included

What Our Basement Mold Inspection Includes

Every basement mold inspection includes a full visual assessment, moisture mapping, and air sampling. We also check adjacent crawl spaces and HVAC returns because mold in those areas affects basement air quality. If you need remediation, we quote it separately so you can decide without pressure.

01

Visual Mold Assessment

We inspect every accessible surface in the basement, including foundation walls, floor joists, subfloor, stored items, and HVAC equipment. We document visible growth with photos and note any water staining or efflorescence.

02

Moisture Mapping

Using a moisture meter and thermal imaging camera, we map moisture levels across walls and floors. This shows us where water is entering and how far it has spread. You get a printed moisture map with your report.

03

Air and Surface Sampling

We collect spore trap air samples and surface lifts from suspect areas. Samples go to an accredited lab for species identification and spore counts. Results come back in 24 to 48 hours.

04

Crawl Space Check

If your basement has an adjacent crawl space, we inspect it too. Crawl space mold often feeds basement mold, and the moisture source is usually the same. We check joists, insulation, and vapor barriers.

05

Written Report with Photos

You receive a photo-documented report with lab results, moisture readings, and a plain-English summary. It states whether mold is active, what species were found, and what caused the moisture. The report is ready for realtors, adjusters, or remediation crews.

06

Remediation Scope if Needed

If remediation is needed, we include a scope of work with the report. It lists affected materials, removal methods, and estimated timeline. You can use it to compare quotes or hire us to do the work.

Service overview

Basement Mold Inspection in PACOIMA, California

A basement mold inspection is a room-by-room evaluation of your below-grade space using moisture readings, thermal scans, and air samples to confirm whether mold is growing and where the water is coming from. We check foundation walls, floor joists, subfloor cavities, HVAC returns, and stored belongings. Every inspection follows ANSI/IICRC S520 principles, so the findings hold up for real estate transactions, insurance claims, and remediation scopes.

Pacoima sits in a hot, dry valley where most homeowners assume mold is not a problem. It is. Winter rain pushes water against 1940s and 1950s block foundations, swamp coolers drip into basements, and slab leaks from aging plumbing feed mold behind drywall for months before anyone notices. If you have been searching for a basement mold inspection in PACOIMA California near me, we cover the whole city, from Van Nuys Boulevard to the Pacoima Wash.

Find Hidden Mold FastA thermal imaging camera sees temperature differences behind drywall that your eyes cannot. We scan every wall, joist, and subfloor cavity in under 90 minutes, then confirm suspected growth with a boroscope and moisture meter. Most homeowners learn about a problem they did not know existed.
Stop Musty Odors at the SourceThat damp, earthy smell in your basement is microbial volatile organic compounds, and it will not go away with a dehumidifier alone. We trace the odor to its source, whether that is a wet foundation wall, a leaking laundry drain, or mold inside the HVAC return. Once we find it, we can fix it.
Protect Your Family's AirBasement air rises. Mold spores from a below-grade colony travel upstairs through stairwells and ductwork, which is why upper-floor allergies often trace back to a basement problem. Identifying the colony early keeps toxic mold exposure out of your living space and out of your lungs.
Professional Basement Mold Inspection in PACOIMA
How we workWe verify the cause, compare realistic options, and confirm the repair before we leave.

The service timeline

Our Basement Mold Inspection Process

The process flexes to the condition, but these checkpoints keep decisions clear.

01

Phone Intake

We ask about the smell, any past water damage, and whether you have a sump pump, swamp cooler, or floor drain. That call takes 10 minutes and tells us what equipment to load. If you need basement mold inspection and removal PACOIMA 24/7, we can dispatch the same day.

Stage 1
02

On-Site Walkthrough

A certified inspector walks the basement, crawl space, and adjacent rooms with a moisture meter and thermal imaging camera. We check every foundation wall, floor joist, and pipe penetration. Expect 60 to 90 minutes on site for a typical 1,000-square-foot basement.

Stage 2
03

Sampling and Testing

When we find suspect growth, we take air samples with a spore trap and surface samples with tape lifts. Samples go to an accredited lab, and results come back in 24 to 48 hours. We also log temperature and relative humidity readings so you can see how wet the space really is.

Stage 3
04

Written Report

You get a photo-documented report with moisture maps, lab results, and a plain-English summary. It states whether mold is active, what species were found, and what caused the moisture. We also include a scope of work if remediation is needed.

Stage 4
05

Walkthrough and Next Steps

We call you to walk through the findings and answer questions. If remediation is needed, we quote it in writing. If it is a moisture problem without mold yet, we tell you that too and explain what to fix before mold starts growing.

Stage 5

Tools & methods

Tools and Methods We Use

Purpose-built equipment, used by trained technicians, so the job is done accurately the first time.

01

Moisture Meter

Measures moisture content in drywall, wood, and concrete. We use it to map where water is present and how far it has spread.

02

Thermal Imaging Camera

Detects temperature differences behind walls and under floors. It shows us where moisture is hiding without cutting into the structure.

03

Boroscope

A small camera on a flexible rod that lets us see inside wall cavities and joist spaces. We use it to confirm mold growth in areas we cannot access visually.

04

Spore Trap

Collects air samples for lab analysis. We use it to measure spore counts and identify mold species in the basement air.

05

HEPA Vacuum

Captures mold spores and debris during remediation. It traps particles as small as 0.3 microns, preventing them from spreading to other rooms.

06

Air Scrubber

Filters airborne spores and particles during remediation. We run air scrubbers continuously to keep the work area clean and protect the rest of the home.

07

Dehumidifier

Removes moisture from the air after water damage or remediation. We use Dri-Eaz and Phoenix Restoration dehumidifiers to bring humidity below 50%.

Use cases

When to Schedule a Basement Mold Inspection

These examples show how the service framework adapts rather than forcing every call through one repair.

Basement Mold Inspection
Musty Basement in PacoimaA homeowner in Pacoima called us because the basement smelled musty every time she did laundry. She could not see any mold. We found wet drywall behind the washer and black mold growth on the bottom plate. The moisture came from a slow drain leak. → We fixed the drain leak, removed the affected drywall, and treated the framing with antimicrobial spray. Post-remediation testing showed spore counts back to normal. The smell was gone in three days.

Flooded Basement in Arleta

After winter rains, a homeowner in Arleta found two inches of water in his basement. He pumped it out but did not dry the space. Two weeks later, mold was growing on the block walls and floor joists. → We set containment, removed mold with HEPA vacuuming and dry ice blasting, and treated the walls with antimicrobial spray. We also installed a sump pump and vapor barrier. Post-remediation testing came back clean.

Pre-Sale Inspection in Sun Valley

A realtor needed a basement mold inspection before closing on a Sun Valley home. The buyer was concerned about a musty odor. We found mold on the crawl space joists and in the HVAC return. → We provided a full report with lab results and a remediation scope. The seller hired us to remove the mold, and post-remediation testing verified the space was clean. The sale closed on time.

Problems we solve

Basement Mold Problems We Solve in PACOIMA

These are the most common basement mold problems we see in Pacoima. If any of these sound familiar, call us for a basement mold inspection before the damage spreads.

ISSUE

Musty odor that will not go away

We trace the odor with a thermal imaging camera and moisture meter, then sample the air to confirm mold species. Once we find the source, we give you a plan to fix it.

SYMPTOM

Dark spots on foundation walls

We inspect the spots, take surface samples, and test for toxigenic species like Stachybotrys. If remediation is needed, we remove the mold and treat the wall with antimicrobial spray.

SIGN

Water stains on floor joists

We check joists with a moisture meter and boroscope to see inside the wood. If mold is present, we remove it with HEPA vacuuming and dry ice blasting, then treat the wood.

ALERT

Mold after a pipe leak or flood

We inspect the affected area, test for mold, and document the damage for your insurance claim. If mold is present, we remove it and verify with post-remediation testing.

Pricing process

Basement Mold Inspection Pricing

$250 - $650 depending on scope

Phase 01

Basement Square Footage

Larger basements take longer to inspect and require more samples. A 500-square-foot basement may need two samples, while a 1,500-square-foot basement may need four or more.

Phase 02

Number of Samples

Each air sample costs $50 to $75, and surface samples cost $25 to $50. If we find multiple suspect areas, we take more samples to confirm the extent of the mold.

Phase 03

Crawl Space Access

If your basement connects to a crawl space, we inspect that too. Crawl spaces with limited access take longer and may require additional equipment.

Questions before we arrive

Frequently Asked Questions

Basement Mold Inspection
Call (833) 929-5837
How much does basement mold inspection cost in PACOIMA California?

Most basement mold inspections in Pacoima run $250 to $650 in 2026, depending on square footage and how many samples we take. A basic visual inspection with two air samples starts around $250. Larger basements, crawl spaces, and post-remediation verification add cost. We quote the full price before we schedule, and there is no charge for the estimate.

Why does my basement keep growing mold in PACOIMA?

Mold needs three things: moisture, organic material, and time. In Pacoima, the moisture usually comes from winter rain seeping through block foundations, a slab leak from old plumbing, or a swamp cooler draining into the basement. Once relative humidity stays above 60% for 48 hours, mold can colonize drywall, wood, and cardboard. Fixing the water source is the only permanent fix.

Who does cellar mold assessment near me in PACOIMA?

We do. Our certified inspectors cover all of Pacoima, including Hansen Hills, Arleta, Lake View Terrace, and Sun Valley. We carry moisture meters, thermal imaging cameras, and boroscopes on every truck. Call (833) 929-5837 and we can usually schedule a cellar mold assessment PACOIMA California within 24 hours.

Can basement mold be removed in PACOIMA California?

Yes. Basement mold can be fully removed when the moisture source is fixed first. We use HEPA vacuuming, antimicrobial spray, and in severe cases dry ice blasting to remove colonies from joists and block walls. After remediation, we run post-remediation mold testing to confirm the space is clear. Most basements are back to normal in two to five days.

Ready when you are

Schedule Your Basement Mold Inspection in PACOIMA, California

If your basement smells musty or you have seen dark spots on the walls, do not wait. Call (833) 929-5837 and we will schedule a basement mold inspection in PACOIMA, California, usually the same day. Our certified inspectors carry thermal imaging cameras and lab-grade sampling equipment on every truck. You get a written report within 24 hours.

Basement Mold Inspection

Talk with the local team

Request Basement Mold Inspection

Call us at (833) 929-5837 or email info@moldremediationservicepacoima.com. We answer the phone 24/7 for emergencies and we schedule same-day estimates for non-emergency work. If you are not sure whether you need testing or full remediation, call us and we will walk you through it. No pressure, no sales pitch.

13520 Paxton St, Pacoima, CA 91331, USA, PACOIMA, CaliforniaMain office · technicians serve the full area

Thanks — your request is in. We will contact you shortly.

Call now